Devolro KingDavid



Our best-seller is the KINGDAVID package which includes, probably, every major must have option. Still you can ask to add on to or change anything we offer. The KINGDAVID offers a unique combination of sheer power, pedigree luxury and personal safety. This outlier is built to deliver the ultimate experience in comfort and performance; on or off-road.

When Security Is A Necessity

Devolro Armored Cars

From B6 to B7 armor – all of our armor components are fabricated using CAD laser and plasma cutting tools to produce armor panels that fit perfectly into the platform of choice. Our fabrication process ensures quick turnaround because all armoring components are pre-manufactured. Our armoring techniques are visibly discrete and use the minimum number of panels necessary for solid protection. We especially address weak points such as the floor area and foot-wells that need extra protection. The rear tailgate is protected with a ballistic steel door, a ballistic glass window and is reinforced with steel overlaps. The bottom of the doors, which are particularly vulnerable areas in most armored cars are secured with overlaps in armor around all doors and windows. This overlap system also helps to protect the passengers from being harmed from flying, armor glass in the case of a bomb blast.

Our ultra-lightweight composite armor is proprietary and is used exclusively in our vehicles. DEVOLRO armored cars exceed B6 levels of protection (45°) in floor and roof areas by providing safety of any angle of attack. The entire armor system is bonded to the chassis which strengthens the structure of the passenger compartment. Amazingly, a full armoring package weighs less than 800 lb. As a result, there is almost no loss in performance.

We consider an armored car to be a must have for personal and corporate security.

Devolro B6 Armoring Specifications


    Stock windshield is replaced with 42 mm bullet resistant composite transparent armor. This multi-layer glass armor is a special combination of poly-carbonate and glass that mitigates shrapnel upon ballistic impact. Armoring glass can be curved and contoured to retain the exact original appearance.

  • BODY

    Body components are armored with a ballistic composite material and ballistic steel in accordance with B6 requirements. Armored components include: Doors, pillar posts, side panels, kick-panels, firewall, header areas, rear cargo compartment, rear wheel arches, rear seat and trunk areas. Special armoring is installed to doubly protect especially vulnerable windows and door seams.


    The entire floor area is armored using molded composite rigid ballistic anti-fragmentation materials. This effectively protects against grenades equivalent to the German DM-51 or US M-67.

  • ROOF

    Composite armoring meets or exceeds NI- IIIa Standards.


    The pillar posts and hinge mounts are reinforced with special steel plates.


    Battery compartment armoring complies with NIJIII standards.


    Proprietary Reinforcement System by DEVOLRO.


    Electronic control Module (ECM) protection armoring complies with NIJIII standards.


    Wire mesh tailpipe protection against insertion of foreign objects.


    Composite armoring material guards against penetration and fragmentation and can withstand DM-51 or M-67 grenade.


    Composite ballistic opaque armoring complies with NIJIII standards.


    Provides extra safety and brute force upon impact, accidental
    or deliberate.


    Provides drive-ability to run 50-100 km after puncture or whole tire damage.

When Safety Is An Issue

Get Armored

Armor High Power Riffle Protection B6 (En-1063) Standard

ClassWeaponCaliberTypeWeight (g)Range (m)Velocity (m/s)ImpactShots
BR1Handgun/Rifle.22 LRLB/RN2,6 ± 0,110,00 ± 0,5360 ± 10170 J3
BR2Handgun9×19mm ParabellumFJ/RN/SC8,0 ± 0,15,00 ± 0,5400 ± 10640 J3
BR3Handgun.357 MagnumFJ/CB/SC10,2 ± 0,15,00 ± 0,5430 ± 10940 J3
BR4Handgun.44 MagnumFJ/FN/SC15,6 ± 0,15,00 ± 0,5440 ± 101510 J3
BR5Rifle5.56×45mm NATOFJ/PB/SCP4,0 ± 0,110,00 ± 0,5950 ± 101800 J3
BR6Rifle7.62×51mm NATOFJ/PB/SC9,5 ± 0,110,00 ± 0,5830 ± 103270 J3
BR7Rifle7.62×51mm NATOFJ/PB/HC9,8 ± 0,110,00 ± 0,5820 ± 103290 J3



LB – Lead Bullet
FJ – Full Metal Jacket
FN – Flat Nose
RN – Round Nose
CB – Cone Bullet
PB – Pointed Bullet
SC – Soft Core (lead)
SCP – Soft Core (lead) & Steel Penetrator
HC – Hard Core, Steel Hardness > 63





LINE-X advanced body coating material is not only stylish – it provides an extremely inert, tough and unscratchable surface. To learn more about the phenomenal, incredible properties of Line-X spray-on coating you must check this video.


The best lifted suspension? – Done. Luxury interior? – No problem. Supreme protection? – Sure.


We invite you to explore the KINGDAVID supreme performance package.


2016 Toyota Tundra CrewMax Platinum. 5.7L V8 4×4 530 HP

  • Custom 7 inch suspension lift and upgrade with 2.5 coil-overs with remote reservoir front and 2.5 piggyback rear shocks by “DEVOLRO”
  • Billet aluminum upper control arms by “DEVOLRO”
  • R35 Nitto off-road tires on 20 inch wheels, 5 pcs.
  • Fender flares by “DEVOLRO”
  • Stainless steel skid plate for engine, transfer case and transmission by “DEVOLRO”
  • Reinforced step bars / rock sliders by “DEVOLRO”
  • Warn 9.5 CTI winch front 9500 lb. + wireless remote by “DEVOLRO”
  • Custom bi-xenon (hi-beam/low-beam) headlights by “DEVOLRO” + core
  • Smoked taillights LED by “DEVOLRO” + core
  • 60-inch “Xtreme” scanning amber, white & red LED tailgate bar
  • Heavy duty Vision-X LED fog lights. (4 pcs. front)
  • Smoked front cab lights, set of 5
  • A powerful 60 inch hi-lift jack
  • Custom steel rear bumper
  • All-season floor mats
  • Custom grill by “DEVOLRO”
  • Custom heavy duty truck bed bar by “DEVOLRO”
  • Truck bed LINE-X protective coating
  • BEDLINER plastic truck bed insert
  • Chrome shackles, 4 pcs.
  • High power battery replacement
  • Custom steel front bumper by “DEVOLRO” with 2″ LED Rigid